13/76
MP120
2.4 LANGUAGE SELECTION
Prior to proceeding, select the language to be used for displaying the menu items on the keyboard display. Italian is
the preset language: however, you may choose from any of the following languages: Italian, English, French,
Spanish, Portuguese, German, Swedish, Finnish, Czech, Polish and Romanian. To access the language setting
function, proceed as follows:
1. Press
ENTER
.
2. Press ▼ until the following message appears on the display:
3. Press
ENTER
to confirm.
4. The list of the available language will appear. Press ▼ to select the desired language, then press
ENTER
to
confirm.
5. Press
EXIT
to exit the menu.
2.5 CHOOSING THE BASE MESSAGE ON THE DISPLAY
You can choose the message that will be shown on the keyboard display when the keyboard is at rest. Among the
options available are:
•
((ELKRON)) MP120
;
•
dd-mm-yyyy hh:mm
, where “gg-mm-yyyy” indicate the day, month and year, respectively, whereas “hh:mm”
indicate the current hour and minutes, respectively (both the date and time are based on the date and time set
in the control unit – refer to paragraphs
3.5 Date change
and
3.6 Time change
);
•
dd-mm day of the week hh:mm
, where “day of the week” indicates the current day (Mon, Tue, Wed, etc.)
whereas “dd-mm” and “hh:mm” have the same meanings as described above.
•
Vis Set _ 2 _ _ 5 _ 7 _
, which displays the sector status ( _ = sector OFF, digit = sector ON).
•
Vis Set _ █ _ _ █ _ █ _
, which displays the sector status ( _ = sector OFF,
█
= sector ON).
“Sector Displaying” features
When you choose one of the two sector status displaying modes, you will also obtain the signal for open inputs (if
any). In fact, if at least one open input is found within a sector, “o” will be displayed. For instance, «Vis Set _ o _ _ _
█
_ _» indicates that sector 6 is ON, and one open input is found in sector 2.
Warning!
If you choose one of the two sector status displaying modes, the “Masking” function cannot be set and,
therefore, the system status cannot be “hidden”.
To select the base message, proceed as follows:
1. Press
ENTER
.
2. Press ▼ until the following message appears on the display:
3. Press
ENTER
to confirm.
4. The list of the messages that can be shown on the display (when the keyboard is at rest) will appear. Press ▼
to choose the desired message, then press
ENTER
to confirm.
5. Press
EXIT
to exit the menu.
2.6 SOFTWARE RELEASE
This function allows you to display the level of the software releases for the control unit, inserters, keyboards and
system expansions. The displayed data cannot be changed.
To display the software versions, proceed as follows:
1. Press
ENTER
.
2. Press ▼ until the following message appears on the display
3. Press
ENTER
to confirm. The control unit release will appear first, in the «MP 120 A Vx.xx» format, where “x.xx”
indicates the release and sub-release.
S o f t w a r e R e l .
L O G O i s p l a y
L a n g u a g e s e l e c t
