49/76
MP120
2. The following message will appear on the display:
Press ▼ until the following message appears on the display:
Then confirm by pressing
ENTER
.
3. The following message will appear on the display:
Press ▼ until the following message appears on the display:
(if “00” is not displayed, the responder will be already enabled). Press
ENTER
.
4. Use button ▼ to select the number of rings (3 to 15) after which the control unit will answer, then confirm your
choice by pressing
ENTER
. The buzzer will beep twice, and the operation will be stored in the event memory
file.
5. Press
EXIT
to leave the menu.
3.3.7 RESPONDER DISABLE
The control unit will not answer an incoming telephone call provided that the number of rings is set to 0. To disable
the control unit to incoming calls, proceed as follows:
1. type in the Master core or the Installer code, then press
ENTER
twice.
2. The following message will appear on the display:
Press ▼ until the following message appears on the display:
Then confirm by pressing
ENTER
.
3. The following message will appear on the display:
Press ▼ until the following message appears on the display:
where “nn” indicates the number of rings set. Press
ENTER
.
4. Use button ▼ to select “00”, then confirm your choice by pressing
ENTER
. The buzzer will beep twice, and the
operation will be stored in the event memory file.
5. Press
EXIT
to leave the menu.
WARNING! When the responder is disabled, the control unit cannot be accessed remotely, nor through the modem
or the telephone.
A n s w e r R i n g : n n
R e m o t e C o n t . S
A n s w e r R i n g : 0 0
R e m o t e C o n t . P r o g
E v e n t M e m o r y
R e m o t e C o n t . S
R e m o t e C o n t . P r o g
E v e n t M e m o r y
