Manufacturer: PPHU
EKOLOT
Type: KR-030 TOPAZ
Handling, Maintenance and Periodic Inspections
Manual
Issue: 1
Rev. N
o
:
Date: July 2010
Date:
Page
44
9.3.1.9
Removal of the rudder
1. Displace the rudder in one direction as much as possible (Pic. 9.3.18).
2. Remove the retaining bolts of the top hinge from the stabilizer (Pic.
9.3.19).
3. Repeat points 1 and 2 for the other side of the rudder.
4. Pull out the top hinge from the seat in the stabilizer (Pic. 9.3.20).
5. Remove the rudder by lifting it up along the axis of rotation (Pic. 9.3.21).
9.3.1.10
Installation of the rudder (Pic. 9.3.18 to 9.3.21 – reverse order)
1. Put the rudder on the pins J.12.642.02.02 of the bottom seat (Pic.
9.3.21).
2. Insert the top hinge into the seat in the stabilizer (Pic. 9.3.20).
3. Displace the rudder in both directions as much as possible (to make
access to the bolts) insert and tight the top hinge mounting bolts (Pic.
9.3.19). The bolts must be secured by covering thread with epoxy glue
for metal-to-metal connections.
T.12.630.00.01
J.12.641.00.02
Rudder
J.10.506.00.01
J.12.642.01.02
J.12.642.02.02
J.12.630.05.01
J.12.640.01.00
Rys. 9.3.3
