Manufacturer: PPHU
EKOLOT
Type: KR-030 TOPAZ
Handling, Maintenance and Periodic Inspections
Manual
Issue: 1
Rev. N
o
:
Date: July 2010
Date:
Page
30
6. Put the rim 42025-1 and the rim 42025-0 with tire (see point 5) on the
hub J.13.613.01.02 in the assembly 9.2.3 and the clamp ring 4206 6’’
7. Screw all the elements with bolts.
8. Pump the wheel to the required pressure.
9.2.7 Removal of the disc brake from the spring
1. Perform procedure 9.2.4
2. Remove the disc from the caliper.
3. Disconnect the brake hose from the caliper:
press the fitting ring (A) and pull the hose (B)
4. Undo the nut and replace the bolt that attach the brake plate to the
spring (3) shown in the picture 9.2.4.
5. Remove the caliper assembly from the spring axle.
A
B
Pic. 9.2.11