Manufacturer: PPHU
EKOLOT
Type: KR-030 TOPAZ
Handling, Maintenance and Periodic Inspections
Manual
Issue: 1
Rev. N
o
:
Date: July 2010
Date:
Page
85
12. Connect the electrical connector (compare to the picture 9.4.1.17,
9.4.1.18 and 9.4.1.19).
−
Twist the connector’s nut
−
Secure with safety wire 1.2 mm
13. Connect the engine controls (compare to the picture 9.4.1.12, 9.4.1.13,
9.4.1.14, 9.4.1.15, 9.4.1.16).
a. Throttle control
−
Pull the control cable through the hole in the throttle lever
bolt
−
Tighten the bolt
−
Put the safety cap on the end of the cable
b. Choke control
−
Pull the choke cable through the clamping element on the
engine
−
Tighten the bolt J.12.421.03.02
−
Bend the tip of the cable by 90
º
c. Carburetors heating control
−
Put the cap J.12.460.01.01 together with the control rod
into the bushing J.12.460.02.01
−
Install the bolt M5x5 DIN 916
14. Fill the lubrication system with engine oil according to the Rotax Engine
Operation Manual.
15. Fill the cooling system with coolant according to the Rotax Engine
Operation Manual.
16. Install the propeller.
−
Install the distance ring J.15.200.01.01 on the reduction gear shaft
−
Install the spinner disc J.15.201.01.00 on the distance ring
−
Install the propeller and tighten using bolts bolts M8x100 DIN 912,
8.8
17. Install the spinner on the disc using bolts M4x16 (eg. ISO 7380).
18. Install both engine cowlings
1. Install the lower cowling and secure with cam locks in such way
the score on the cam lock was aligned with line on the cowling
2. Connect the landing lamp cable (compare to the picture 9.4.1.4).
3. Install the lower cowling and secure with cam locks in such way
the score on the cam lock was aligned with line on the cowling