Manufacturer: PPHU
EKOLOT
Type: KR-030 TOPAZ
Handling, maintenance and periodic inspections
manual
Issue: 1
Rev. N
o
:
Date: July 2010
Date:
Page
170
o
Close the body placing the o-ring
Ø
48x3 into the groove
o
Tighten the bolts M6x18 using the thread sealant
o
Install the coolant hoses 6, 7 & 8 on appropriate inlets of
the thermostat and secure with clamps W1 25-28
(compare to the picture from the previous point)
4. Carburetors heating system
−
Removal of the carburetors heating system
o
Drain the coolant from the engine cooling system (see
point 8 in the procedure 9.4.1.1)
o
Disconnect the control system of the carburetors heating
system (see the point 5c in the procedure 9.4.1.1)
o
Remove the clamps from the heating hoses no 9, 10, &
11 and remove the hoses
J.15.502.02.00
J.15.500.04.00
Clamp W1
13-15
Pic. 9.4.5.9