Manufacturer: PPHU
EKOLOT
Type: KR-030 TOPAZ
Handling, maintenance and periodic inspections
manual
Issue: 1
Rev. N
o
:
Date: July 2010
Date:
Page
189
9.5.2 REPLACEMENT OF GLAZING
Removal of cracked glazing
1. Using a heat gun heat the edges of the broken glazing in order to
make them flexible. Secure the structures bordering the glazing
not to destroy painting and composite structure.
2. Tear of the heated edges of the structure. the glazing should
come off with the paint layer.
3. Clean the frame after removal of the glazing carefully, paying
attention not to destroy the composite structure.
Installation of ne glazing
1. Adjust the glazing, so it fit the frame correctly. Small
maladjustment that can be corrected by light pressing is
acceptable.
2. Perform the mounting according to the instruction delivered with
the new glazing.
