Edge-Core ECS4660-28F, Management Manual, Page: 1379 / 2020

C
HAPTER
4 0
| VLAN Commands
Configuring Voice VLANs
– 1379 –
E
XAMPLE
The following example displays all configured MAC address-based VLANs.
Console#show mac-vlan
MAC Address VLAN ID Priority
----------------- -------- --------
00-00-00-11-22-33 10 0
Console#
C
ONFIGURING
V
OICE
VLAN
S
The switch allows you to specify a Voice VLAN for the network and set a
CoS priority for the VoIP traffic. VoIP traffic can be detected on switch ports
by using the source MAC address of packets, or by using LLDP
(IEEE 802.1AB) to discover connected VoIP devices. When VoIP traffic is
detected on a configured port, the switch automatically assigns the port to
the Voice VLAN. Alternatively, switch ports can be manually configured.
voice vlan
This command enables VoIP traffic detection and defines the Voice VLAN
ID. Use the no form to disable the Voice VLAN.
S
YNTAX
voice vlan voice-vlan-id
no voice vlan
voice-vlan-id - Specifies the voice VLAN ID. (Range: 1-4094)
D
EFAULT
S
ETTING
Disabled
Table 171: Voice VLAN Commands
Command Function Mode
voice vlan Defines the Voice VLAN ID GC
voice vlan aging Configures the aging time for Voice VLAN ports GC
voice vlan mac-address Configures VoIP device MAC addresses GC
switchport voice vlan Sets the Voice VLAN port mode IC
switchport voice vlan
priority
Sets the VoIP traffic priority for ports IC
switchport voice vlan rule Sets the automatic VoIP traffic detection method for
ports
IC
switchport voice vlan
security
Enables Voice VLAN security on ports IC
show voice vlan Displays Voice VLAN settings PE