Edge-Core ECS4660-28F, Management Manual, Page: 1558 / 2020

C
HAPTER
44
| LLDP Commands
– 1558 –
E
XAMPLE
Note that an IP phone or other end-node device which advertises LLDP-
MED capabilities must be connected to the switch for information to be
displayed in the “LLDP-MED Capability” and other related fields.
Console#show lldp info remote-device
LLDP Remote Devices Information
Interface Chassis ID Port ID System Name
--------- ----------------- ----------------- ---------------------
Eth 1/1 00-E0-0C-00-00-FD 00-E0-0C-00-01-02
Eth 1/2 00-E0-0C-9C-CA-10 00-E0-0C-9C-CA-11
Console#show lldp info remote-device detail ethernet 1/1
---------------------------------------------------------------
Local Port Name : Eth 1/1
Chassis Type : MAC Address
Chassis ID : 00-01-02-03-04-05
Port ID Type : Network Address
Port ID : 00-01-02-03-04-06
System Name :
System Description :
System Description : ECS5110-12M
SystemCapSupported : Bridge
SystemCapEnabled : Bridge
Remote Management Address :
192.168.1.2 (IPv4)
Remote Port VID : 1
Remote VLAN Name :
VLAN-1 : DefaultVlan
Remote Port-Protocol VLAN :
VLAN-3 : supported, enabled
Remote Protocol Identity (Hex) :
88-CC
Remote MAC/PHY Configuration Status :
Remote port auto-neg supported : Yes
Remote port auto-neg enabled : Yes
Remote port auto-neg advertised cap (Hex) : 0000
Remote port MAU type : 6
Remote Power via MDI :
Remote power class : PSE
Remote power MDI supported : Yes
Remote power MDI enabled : Yes
Remote power pair controllable : No
Remote power pairs : Spare
Remote power classification : Class1
Remote Link Aggregation :
Remote link aggregation capable : Yes
Remote link aggregation enable : No
Remote link aggregation port ID : 0
Remote Max Frame Size : 1518
LLDP-MED Capability :
Device Class : Network Connectivity
Supported Capabilities : LLDP-MED Capabilities
Network Policy
Location Identification
Extended Power via MDI - PSE
Inventory
Current Capabilities : LLDP-MED Capabilities
Location Identification
Extended Power via MDI - PSE
Inventory