Edge-Core ECS4660-28F, Management Manual, Page: 1027 / 2020

C
HAPTER
27
| Flow Sampling Commands
– 1027 –
This example shows how to modify the sFlow port number for an already
configured collector.
Console(config)#sflow owner stat_server1 timeout 100 port 35100
Console(config)#
sflow sampling
instance
This command enables an sFlow data source instance for a specific
interface that takes samples periodically based on the number of packets
processed. Use the no form to remove the sampling data source instance
from the switch’s sFlow configuration.
S
YNTAX
sflow sampling { interface interface } instance instance-id
receiver owner-name sampling-rate sample-rate
[ max-header-size max-header-size ]
no sflow sample { interface interface } instance instance-id
interface - The source from which the samples will be taken and
sent to a collector.
ethernet unit / port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-28)
instance-id - An instance ID used to identify the sampling source.
(Range: 1)
owner-name - The associated receiver, to which the samples will be
sent. (Range: 1-30 alphanumeric characters)
sample-rate - The packet sampling rate, or the number of packets
out of which one sample will be taken. (Range: 256-16777215
packets)
max-header-size - The maximum size of the sFlow datagram
header. (Range: 64 to 256 bytes)
D
EFAULT
S
ETTING
No sFlow sampling instance id configured.
Maximu Header Size: 128 bytes
C
OMMAND
M
ODE
Privileged Exec