Edge-Core ECS4660-28F, Management Manual, Page: 126 / 2020

C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 126 –
M
AIN
M
ENU
Using the onboard web agent, you can define system parameters, manage
and control the switch, and all its ports, or monitor network conditions. The
following table briefly describes the selections available from this program.
Table 6: Switch Main Menu
Menu Description Page
System
General Provides basic system description, including contact information 149
Switch Shows the number of ports, hardware version, power status, and
firmware version numbers
151
Capability Enables support for jumbo frames;
shows the bridge extension parameters
152 ,
153
File 155
Copy Allows the transfer and copying files 155
Set Startup Sets the startup file 158
Show Shows the files stored in flash memory; allows deletion of files 159
Automatic Operation Code Upgrade Automatically upgrades operation code if a newer version is
found on the server 160
Time 164
Configure General
Manual Manually sets the current time 164
SNTP Configures SNTP polling interval 165
NTP Configures NTP authentication parameters 166
Configure Time Server Configures a list of NTP or SNTP servers 167
Configure SNTP Server Sets the IP address for SNTP time servers 167
Add NTP Server Adds NTP time server and index of authentication key 168
Show NTP Server Shows list of configured NTP time servers 168
Add NTP Authentication Key Adds key index and corresponding MD5 key 169
Show NTP Authentication Key Shows list of configured authentication keys 169
Configure Time Zone Sets the local time zone for the system clock 171
Console Sets console port connection parameters 172
Telnet Sets Telnet connection parameters 174
CPU Utilization Displays information on CPU utilization 175
Memory Status Shows memory utilization parameters 176
Reset Restarts the switch immediately, at a specified time, after a
specified delay, or at a periodic interval
177
Interface 181
Port 182
General
Configure by Port List Configures connection settings per port 182
Configure by Port Range Configures connection settings for a range of ports 184