Edge-Core ECS4660-28F, Management Manual, Page: 1045 / 2020

C
HAPTER
28
| Authentication Commands
AAA
– 1045 –
group - Specifies the server group to use.
radius - Specifies all RADIUS hosts configure with the radius-
server host command.
- Specifies all hosts configure with the
tacacs-server host command.
server-group - Specifies the name of a server group configured
with the aaa group server command. (Range: 1-64 characters)
D
EFAULT
S
ETTING
Accounting is not enabled
No servers are specified
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
Note that the default and method-name fields are only used to describe
the accounting method(s) configured on the specified RADIUS or
servers, and do not actually send any information to the servers about the
methods to use.
E
XAMPLE
Console(config)#aaa accounting dot1x default start-stop group radius
Console(config)#
aaa accounting exec
This command enables the accounting of requested Exec services for
network access. Use the no form to disable the accounting service.
S
YNTAX
aaa accounting exec { default | method-name }
start-stop group { radius | | server-group }
no aaa accounting exec { default | method-name }
default - Specifies the default accounting method for service
requests.
method-name - Specifies an accounting method for service
requests. (Range: 1-255 characters)
start-stop - Records accounting from starting point and stopping
point.