Edge-Core ECS4660-28F, Management Manual, Page: 1463 / 2020

C
HAPTER
43
| Multicast Filtering Commands
MLD Snooping
– 1463 –
E
XAMPLE
Console(config)#ipv6 mld snooping query-max-response-time seconds 15
Console(config)#
ipv6 mld snooping
robustness
This command configures the MLD Snooping robustness variable. Use the
no form to restore the default value.
S
YNTAX
ipv6 mld snooping robustness value
no ipv6 mld snooping robustness
value - The number of the robustness variable. (Range: 2-10)
D
EFAULT
S
ETTING
2
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
A port will be removed from the receiver list for a multicast service when
no MLD reports are detected in response to a number of MLD queries. The
robustness variable sets the number of queries on ports for which there is
no report.
E
XAMPLE
Console(config)#ipv6 mld snooping robustness 2
Console(config)#
ipv6 mld snooping
router-port-
expire-time
This command configures the MLD query timeout. Use the no form to
restore the default.
S
YNTAX
ipv6 mld snooping router-port-expire-time time
no ipv6 mld snooping router-port-expire-time
time - Specifies the timeout of a dynamically learned router port.
(Range: 300-500 seconds)
D
EFAULT
S
ETTING
300 seconds
C
OMMAND
M
ODE
Global Configuration