Edge-Core ECS4660-28F, Management Manual, Page: 1451 / 2020

C
HAPTER
43
| Multicast Filtering Commands
IGMP Filtering and Throttling
– 1451 –
E
XAMPLE
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#permit
Console(config-igmp-profile)#
range
This command specifies multicast group addresses for a profile. Use the no
form to delete addresses from a profile.
S
YNTAX
[ no ] range low - ip-address [ high - ip-address ]
low-ip-address - A valid IP address of a multicast group or start of a
group range.
high-ip-address - A valid IP address for the end of a multicast group
range.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
IGMP Profile Configuration
C
OMMAND
U
SAGE
Enter this command multiple times to specify more than one multicast
address or address range for a profile.
E
XAMPLE
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#range 239.1.1.1
Console(config-igmp-profile)#range 239.2.3.1 239.2.3.100
Console(config-igmp-profile)#
ip igmp
authentication
This command enables IGMP authentication on the specified interface.
When enabled and an IGMP JOIN request is received, an authentication
request is sent to a configured RADIUS server. Use the no form to disable
IGMP authentication.
S
YNTAX
[ no ] ip igmp authentication
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Interface Configuration(Ethernet, Port Channel)