Edge-Core ECS4660-28F, Management Manual, Page: 186 / 2020

C
HAPTER
5
| Interface Configuration
Port Configuration
– 186 –
◆
Autonegotiation – Shows if auto-negotiation is enabled or disabled.
◆
Oper Speed Duplex – Shows the current speed and duplex mode.
◆
Oper Flow Control – Shows the flow control type used.
◆
MTU Size – The maximum transfer unit (MTU) allowed for layer 2
packets crossing a Gigabit or 10 Gigabit Ethernet port or trunk.
W
EB
I
NTERFACE
To display port connection parameters:
1.
Click Interface, Port, General.
2.
Select Show Information from the Action List.
Figure 31: Displaying Port Information
C
ONFIGURING
L
OCAL
P
ORT
M
IRRORING
Use the Interface > Port > Mirror page to mirror traffic from any source
port to a target port for real-time analysis. You can then attach a logic
analyzer or RMON probe to the target port and study the traffic crossing
the source port in a completely unobtrusive manner.
Figure 32: Configuring Local Port Mirroring
CLI R
EFERENCES
◆
"Port Mirroring Commands" on page 1229
C
OMMAND
U
SAGE
◆
Traffic can be mirrored from one or more source ports to a destination
port on the same switch (local port mirroring as described in this
section), or from one or more source ports on remote switches to a
Source
port(s) Single
target
port