Edge-Core ECS4660-28F, Management Manual, Page: 661 / 2020

C
HAPTER
15
| Multicast Filtering
Multicast VLAN Registration for IPv4
– 661 –
source port with a valid link has been configured (see "Configuring MVR
Interface Status" on page 665 ).
◆
MVR Current Learned Groups – The number of MVR groups currently
assigned to this domain.
◆
Forwarding Priority – The CoS priority assigned to all multicast traffic
forwarded into this domain. (Range: 0-7, where 7 is the highest
priority)
This parameter can be used to set a high priority for low-latency
multicast traffic such as a video-conference, or to set a low priority for
normal multicast traffic not sensitive to latency.
◆ Upstream Source IP – The source IP address assigned to all MVR
control packets sent upstream on the specified domain. By default, all
MVR reports sent upstream use a null source IP address.
W
EB
I
NTERFACE
To configure settings for an MVR domain:
1.
Click Multicast, MVR.
2.
Select Configure Domain from the Step list.
3.
Select a domain from the scroll-down list.
4.
Enable MVR for the selected domain, select the MVR VLAN, set the
forwarding priority to be assigned to all ingress multicast traffic, and
set the source IP address for all control packets sent upstream as
required.
5.
Click Apply.
Figure 377: Configuring Domain Settings for MVR