Edge-Core ECS4660-28F, Management Manual, Page: 475 / 2020

C
HAPTER
14
| Basic Administration Protocols
Link Layer Discovery Protocol
– 475 –
the other items and described under “ Configuring LLDP Interface
Civic-Address .”
■
ECS ELIN – Emergency Call Service Emergency Location
Identification Number supports traditional PSAP-based Emergency
Call Service in North America.
◆
Country Code – The two-letter ISO 3166 country code in capital ASCII
letters. (Example: DK, DE or US)
◆
What – The type of device to which the location applies as described
for the field entry “Device entry refers to” under “ Configuring
LLDP Interface Attributes .”
Port Details – Extended Power-via-MDI
◆ Power Type – Power Sourcing Entity (PSE) or Power Device (PD).
◆ Power Priority – Shows power priority for a port. (Unknown, Low,
High, Critical)
◆ Power Source – Shows information based on the type of device:
■
PD – Unknown, PSE, Local, PSE and Local
■
PSE – Unknown, Primary Power Source, Backup Power Source -
Power conservation mode
◆ Power Value – The total power in watts required by a PD device from
a PSE device, or the total power a PSE device is capable of sourcing
over a maximum length cable based on its current configuration. This
parameter supports a maximum power required or available value of
102.3 Watts to allow for future expansion. (Range: 0 - 102.3 Watts)
Port Details – Inventory
6
◆
Hardware Revision – The hardware revision of the end-point device.
◆
Software Revision – The software revision of the end-point device.
◆
Manufacture Name – The manufacturer of the end-point device.
◆
Asset ID – The asset identifier of the end-point device. End-point
devices are typically assigned asset identifiers to facilitate inventory
management and assets tracking.
◆
Firmware Revision – The firmware revision of the end-point device.
◆
Serial Number – The serial number of the end-point device.
◆
Model Name – The model name of the end-point device.