Edge-Core ECS4660-28F, Management Manual, Page: 1054 / 2020

C
HAPTER
28
| Authentication Commands
Web Server
– 1054 –
C
OMMAND
U
SAGE
◆
Both HTTP and HTTPS service can be enabled independently on the
switch. However, you cannot configure the HTTP and HTTPS servers to
use the same UDP port.
◆
If you enable HTTPS, you must indicate this in the URL that you specify
in your browser: https :// device [: port_number ]
◆
When you start HTTPS, the connection is established in this way:
■
The client authenticates the server using the server’s digital
certificate.
■
The client and server negotiate a set of security protocols to use for
the connection.
■
The client and server generate session keys for encrypting and
decrypting data.
◆
The client and server establish a secure encrypted connection.
A padlock icon should appear in the status bar for Internet Explorer 6,
Mozilla Firefox 4, or Google Chrome 29, or more recent versions.
The following web browsers and operating systems currently support
HTTPS:
◆
To specify a secure-site certificate, see “Replacing the Default Secure-
site Certificate” on page 380 . Also refer to the copy tftp https-certificate
command.
E
XAMPLE
Console(config)#ip http secure-server
Console(config)#
R
ELATED
C
OMMANDS
ip http secure-port (1053)
copy tftp https-certificate ( 914 )
show system (906)
Table 104: HTTPS System Support
Web Browser Operating System
Internet Explorer 6.x or later Windows 98,Windows NT (with service pack 6a),
Windows 2000, XP, Vista, 7, 8
Mozilla Firefox 4 or later Windows 2000, XP, Vista, 7, 8, Linux
Google Chrome 29 or later Windows XP, Vista, 7, 8