Edge-Core ECS4660-28F, Management Manual, Page: 156 / 2020

C
HAPTER
4
| Basic Management Tasks
Managing System Files
– 156 –
◆
File Name – The file name should not contain slashes (\ or /), the
leading letter of the file name should not be a period (.), and the
maximum length for file names is 32 characters for files on the switch
or 128 characters for files on the server. (Valid characters: A-Z, a-z,
0-9, “.”, “-”, “_”)
N
OTE
:
Up to two copies of the system software (i.e., the runtime firmware)
can be stored in the file directory on the switch.
N
OTE
:
The maximum number of user-defined configuration files is limited
only by available flash memory space.
N
OTE
:
The file
“
Factory_Default_Config.cfg
”
can be copied to a file server
or management station, but cannot be used as the destination file name on
the switch.
W
EB
I
NTERFACE
To copy firmware files:
1.
Click System, then File.
2.
Select Copy from the Action list.
3.
Select FTP Upgrade, HTTP Upgrade, or TFTP Upgrade as the file transfer
method.
4.
If FTP or TFTP Upgrade is used, enter the IP address of the file server.
5.
If FTP Upgrade is used, enter the user name and password for your
account on the FTP server.
6.
Set the file type to Operation Code.
7.
Enter the name of the file to download.
8.
Select a file on the switch to overwrite or specify a new file name.
9.
Then click Apply.