Edge-Core ECS4660-28F, Management Manual, Page: 1901 / 2020

C
HAPTER
51
| IP Routing Commands
Policy-based Routing for BGP
– 1901 –
E
XAMPLE
Console(config)#route-map r1 permit 1
Console(config-route-map)#match as-path 60
Console(config-route-map)#set weight 30
Console(config-route-map)#call FD
Console(config-route-map)#
continue
This command goes to a route-map entry with a higher sequence number
after a successful match occurs. Use the no form to remove this entry from
a route map.
S
YNTAX
continue [ sequence-number ]
no continue
sequence-number – Sequence number at which to continue
processing. (Range: 1-65535)
C
OMMAND
M
ODE
Route Map
C
OMMAND
U
SAGE
If no match statements precede the call entry, the call is automatically
executed. If no sequence number is specified by the call entry, the next
entry is executed.
E
XAMPLE
Console(config)#route-map RD permit 1
Console(config-route-map)#match as-path 60
Console(config-route-map)#set weight 30
Console(config-route-map)#continue 3
Console(config-route-map)#
description
This command creates a description of an entry in the route map. Use the
no form to remove the description.
S
YNTAX
description text
no description
text – Comment describing this route-map rule. (Maximum
length: 128 characters, no spaces or other special characters)
C
OMMAND
M
ODE
Route Map