Edge-Core ECS4660-28F, Management Manual, Page: 169 / 2020

C
HAPTER
4
| Basic Management Tasks
Setting the System Clock
– 169 –
Figure 16: Adding an NTP Time Server
To show the list of configured NTP time servers:
1.
Click System, then Time.
2.
Select Configure Time Server from the Step list.
3.
Select Show NTP Server from the Action list.
Figure 17: Showing the NTP Time Server List
S
PECIFYING
NTP A
UTHENTICATION
K
EYS
Use the System > Time (Configure Time Server – Add NTP Authentication
Key) page to add an entry to the authentication key list.
CLI R
EFERENCES
◆
"ntp authentication-key" on page 948
P
ARAMETERS
The following parameters are displayed:
◆
Authentication Key – Specifies the number of the key in the NTP
Authentication Key List to use for authentication with a configured
server. NTP authentication is optional. When enabled on the System >
Time (Configure General) page, you must also configure at least one
key on this page. Up to 255 keys can be configured on the switch.
(Range: 1-65535)
◆
Key Context – An MD5 authentication key string. The key string can
be up to 32 case-sensitive printable ASCII characters (no spaces).
NTP authentication key numbers and values must match on both the
server and client.