ECO-MATIC ESC 16, Operating Instructions Manual

Page: 86 / 128

18
Step 2 – Replace the nut that holds the fuse
housing in place & tighten using
long nose pliers.
Step 3 – Being careful not to bend the
terminals on the fuse housing put
the clips back in place. Use long
nose pliers to slide the clips onto
the terminals.
BMSC 13 220V: The correct
positioning of the wires on the fuse
housing terminals when looking
from the bottom of the chlorinator
is: 1) white wire from the final slot
of the terminal strip, 2) white wire
from the top right terminal on the
power switch 3) black wire from the
third slot on the terminal strip 4)
black wire from the power switches
top left terminal.
BMSC 20 – 26 220V: The correct
positioning of the wires on the fuse
housing terminals when looking
from the bottom of the chlorinator
is: 1) blue wire from the transformer
2) white wire from the terminal strip
3) brown wire from the transformer
4) black wire from the top left
terminal of the power switch.
BMSC 16/20/26 110V: The lower
terminal on the fuse has the brown
wire from the bottom right slot on
the terminal strip connected to it &
the brown cable on the top terminal
comes from the top left terminal on
the power switch.
1. WHITE
1. BLUE
3. BLACK
3. BROWN
2. WHITE
2. WHITE
4. BLACK
4. BLACK