ECO-MATIC ESC 16, Operating Instructions Manual

Page: 79 / 128

11
Step 5 – Tighten cable clamp using a
Phillips head screwdriver (two
point) & replace any cable ties that
were removed.
Step 4 – Replace the transformer wires to their respective positions on the terminal strip using
a flat blade screwdriver (3mm).
BMSC 13 220V: From left to right on the terminal strip the transformer wires are
colored 1) brown, 2) light blue, 3) purple, 4) gray. The white & black wires in the first
two slots are the power cord wires.
BMSC 13/20/26 110V: From left to right on the terminal strip the wires are colored 1) light blue,
2) brown, 3) gray, 4) purple. The white & black wires in the first two slots are the power cord
wires.
Step 6 – Replace the protective covering on
the PCB using a Phillips head screw
driver (one point).
1. BROWN
1. LIGHT BLUE
2. LIGHT BLUE
2. BROWN
3. PURPLE
3. BLACK
4. BLACK
4. PURPLE