ECO-MATIC ESC 16, Operating Instructions Manual

Page: 33 / 128

7
Step 1 – Feed the power cord through
the slot in the bottom panel &
replace the holding plate onto the
power cord using a Phillips head
screwdriver (two point).
Step 3 – Reconnect the black cable to the
left & the white cable to the right of
the terminal strip using a flat blade
screwdriver (3mm) & replace any
cable ties that were removed.
Step 5 – Remove the bottom panel by using a
Phillips head screwdriver to remove
the 4 screws holding it in place.
Assembly
Step 2 – Reattach the green power cord
Earth lead, use an 8mm spanner to
tighten nut.
Step 4 – Tighten the four screws on the
bottom panel to hold it in place
using a Phillips head screwdriver
(two point).
BLACK
SCREWS
SCREWS
WHITE