ECO-MATIC ESC 16, Operating Instructions Manual

Page: 40 / 128

14
Step 5 – Remove the locating screws
connecting the transformer to
the chlorinator. Remove the front
two first using a Phillips head
screwdriver (two point) then
using a long blade Phillips head
screwdriver remove the rear screw.
Step 6 – Mark the wire connections on the
PRIMARY side of the transformer
to allow for easy reconnection.
Remove the 2 wires with a flat
blade screwdriver (3mm) & remove
the transformer.
Step 1 – Replace previously marked wires
back into correct locations on
PRIMARY side of transformer with
a flat blade screwdriver (3mm). The
blue wire connects to the rear of
the transformer & the brown wire
connects to the front.
Assembly
Step 2 – Place transformer in correct
location, replace the rear screw
first using a long blade Phillips
head screwdriver then the front
two screws using a Phillips head
screwdriver (two point).
BLUE
BROWN