INSTRUCTIONS
Page 1: ...INSTRUCTIONS ...
Page 2: ...onnection NB Push the hose entirely over the nipple before tightening the threaded connection 8 Seal all couplings that are not being used by either making a by pass or by putting the end cap on a small piece of garden hose see picture 2 below Do not connect outlet 9 Start the pump and check the flow rate see picture 3 1 Place the solar collectors side by side on the ground 2 Connect the inlets and...
Page 3: ...ime the by pass valve should be fully closed when the solar collector are operating 4 Connect the return hose to the by pass connection Picture 2 Sealing unused couplings Connecting more collectors to your El Niño The El Niño system offers two options to increase your solar collector area Each El Niño Basic Kitt 3 60 m can either be con nected to the El Niño Extension Kit 1 80 m or to more El Niño...
Page 4: ...chieve best efficiency from the El Niño we recommend that the pump is circulating the water in sunny weather and are stopped when raining Suggestion Connect the pump to a timer which should be set to work during sun hours El Niño should not under any circumstances be dragged or lifted by the hoses Always use filter and appropriate pool chemicals to protect the solar collector from dirt and algal blo...
