ECO-MATIC ESC 16, Operating Instructions Manual

Page: 41 / 128

15
Step 3 – Feed the secondary transformer
wires through the clear tubing then
using the wire clamp, fasten the
wires back onto the chlorinator
using a Phillips head screwdriver
(two point).
Step 4 – Replace transformer wires on the
PCB using a soldering iron with
unleaded solder. The order for
replacing the transformer wires
back onto the PCB from left to right
is 1) red, 2) white, 3) red.
Step 5 – Replace any cable ties that
were removed then replace the
protective covering on the PCB with
a Phillips head screwdriver (one
point).
1. RED
2. WHITE
3. RED