ECO-MATIC ESC 16, Operating Instructions Manual

Page: 108 / 128

12
Step 1 – Place the fuse housing back into its
location on the control panel.
EcoSPA 220V: The correct positioning for the wires on the left fuse housing are 1) lower
terminal has the light blue wire from the last slot on the terminal strip, 2) top terminal has the
dark blue wire from the power switch. The wires on the right fuse housing are positioned 3)
lower terminal has the brown wire from the 3rd slot on the terminal strip, 4) top terminal has the
dark brown wire from the power switch.
Step 3 – Being careful not to bend the terminals on the fuse housing put the clips to the fuse
housing back in place. Use long nose pliers to slide the clips onto the terminal.
Assembly
Step 2 – Replace the nut that holds the fuse
housing in place & tighten using
long nose pliers.
EcoSPA 110V: The top terminal on the fuse
has the brown wire connected to the bottom
left terminal on the power switch. The bottom
fuse terminal wire which is also brown
connects into the third slot from the left on
the terminal strip; this is to the right of the
white wire from the power cord.
1. LIGHT BLUE
2. DARK BLUE
3. BROWN
4. DARK BROWN