ECO-MATIC ESC 16, Operating Instructions Manual

Page: 101 / 128

5
Step 5 – Remove the appropriate cable ties
with a pair of side cutters. Take
special care not to cut or damage
the wiring.
Note position of cable ties for
easier reassembly.
Step 1 – Place transformer over the locating
screw.
Assembly
Step 6 – Remove the nut on the top of
the transformer with an 8mm
spanner then lift off the black
heat dispersion disk which when
removed allows for the transformer
to be lifted out of the chlorinator.
When removing heat dispersion
disk also remove both the spring &
flat washers.
Step 2 – Place heat dispersion disk over the
transformer with the shiny metallic
side face up. Place flat washer in
place over the locating screw with
spring washer on top, tighten the
transformer nut using an 8mm
spanner.