ECO-MATIC ESC 16, Operating Instructions Manual, Page: 82 / 128

14
Step 3 – After feeding the transformer wires
through the clear tubing use a
soldering iron with unleaded solder
to attach the wires to the PCB.
The order for connecting the wires
from the left of the PCB is 1) red, 2)
black 3) white.
Step 5 – Tighten cable clamp using a
Phillips head screwdriver (two
point) & replace any cable ties that
were removed.
Step 4 – Being careful not to bend the
terminals on the fuse housing put
the blue & brown clips connecting
the transformer to the fuse housing
back in place. Use long nose pliers
to slide the clips onto the terminal.
The blue wire connects to the lower
terminal of the fuse at the bottom
of the chlorinator. The brown wire
connects to the lower terminal of
the top fuse.
Step 6 – Replace the protective covering
on the PCB using a Phillips head
screw driver (one point).
BLUE
1. RED 2. BLACK 3. WHITE
BROWN