A
IQ 250/260 Meter
Appendix B:
Modbus Mapping
7DB7 - 7DCE
32184 - 32207
Relay#2 Label and State Names
24
7DCF - 7DFE
32208 - 32255
Reserved
Set to 0.
48
7DFF - 7E06
32256 - 32263
Input#1 Accumulator Label
ASCII
16 char
8
7E07 - 7E0E
32264 - 32271
Input#2 Accumulator Label
ASCII
16 char
8
7E0F - 7E1E
32272 - 32287
Reserved
Set to 0.
16
7E1F - 7E1F
32288 - 32288
Input#1 Accumulator Kt
UINT16
bit-mapped
ddVVVVVV VVVVVVVV
1
7E20 - 7E20
32289 - 32289
Input#2 Accumulator Kt
UINT16
bit-mapped
ddVVVVVV VVVVVVVV
1
7E21 - 7F3E
32290 - 32575
Reserved
Set to 0.
286
Block Size:
512
Second Overlay
write only in PS update mode
7D3F - 7D46
32064 - 32071
Input#1 Label
ASCII
16 char
8
7D47 - 7D4E
32072 - 32079
Input#1 Low State Name
ASCII
16 char
8
7D4F - 7D56
32080 - 32087
Input#1 High State Name
ASCII
16 char
8
7D57 - 7D6E
32088 - 32111
Input#2 Label and State Names
24
7D6F - 7D86
32112 - 32135
Input#3 Label and State Names
24
7D87 - 7D9E
32136 - 32159
Input#4 Label and State Names
24
7D9F - 7DA6
32160 - 32167
Output#1 Label
ASCII
16 char
8
7DA7 - 7DAE
32168 - 32175
Output#1 Open State Name
ASCII
16 char
8
7DAF - 7DB6
32176 - 32183
Output#1 Closed State Name
ASCII
16 char
8
7DB7 - 7DCE
32184 - 32207
Output#2 Label and State Names
24
7DCF - 7DE6
32208 - 32231
Output#3 Label and State Names
24
7DE7 - 7DFE
32232 - 32255
Output#4 Label and State Names
24
7DFF - 7E06
32256 - 32263
Input#1 Accumulator Label
ASCII
16 char
8
7E07 - 7E0E
32264 - 32271
Input#2 Accumulator Label
ASCII
16 char
8
7E0F - 7E16
32272 - 32279
Input#3 Accumulator Label
ASCII
16 char
8
7E17 - 7E1E
32280 - 32287
Input#4 Accumulator Label
ASCII
16 char
8
7E1F - 7E1F
32288 - 32288
Input#1 Accumulator Kt
UINT16
bit-mapped
ddVVVVVV VVVVVVVV
1
7E20 - 7E20
32289 - 32289
Input#2 Accumulator Kt
UINT16
bit-mapped
ddVVVVVV VVVVVVVV
1
7E21 - 7E21
32290 - 32290
Input#3 Accumulator Kt
UINT16
bit-mapped
ddVVVVVV VVVVVVVV
1
7E22 - 7E22
32291 - 32291
Input#4 Accumulator Kt
UINT16
bit-mapped
ddVVVVVV VVVVVVVV
1
7E23 - 7F3E
32292 - 32575
Reserved
Set to 0.
284
Block Size:
512
Second Overlay
write only in PS update mode
7D3F - 7D3F
32064 - 32064
Update rate
UINT16
0 to 65535
milliseconds
Set to 0.
1
7D40 - 7D40
32065 - 32065
Channel direction - 1mA Card only!
UINT16
bit-mapped
-------- ----4321
Full range output for 0-1mA card only: A bit set(1) means
full range (-1mA to +1mA); a bit cleared(0) means source
only (0mA to +1mA).
1
7D41 - 7D41
32066 - 32066
Format parameter for output #1
UINT16
bit-mapped
-------- ---f suwb
Format of the polled register:f=float 32; s=signed 32 bit int;
u=unsigned 32 bit int; w=signed 16 bit int; b=unsigned 16
bit int.
1
7D42 - 7D42
32067 - 32067
Source register for Output#1
UINT16
0 to 65535
This register should be programmed with the address of the
register, whose value is to be used for current output. In
different words, the current level output of analog board will
change with the value of the register pointed here.
1
Same as Output #1.
KT power factor for the accumulator input.
"V" is raw power value in Wh/pulse from 0 to 9999.
"dd"=decimal point position: 00=0.XXXX, 01=X.XXX,
10=XX.XX, 11= X.XXX.
Settings Registers for Analog Out 0-1mA / Analog Out 4-20mA Cards
Same as Input #1.
Same as Input #1.
Same as Output #1.
Same as Output #1.
Same as Relay #1.
KT power factor for the Pulse Output.
"V" is raw power value in Wh/pulse from 0 to 9999.
"dd"=decimal point position: 00=0.XXXX, 01=X.XXX,
10 XX XX 11 X XXX
Settings Registers for Digital I/O Pulse Output Card
Same as Input #1.
www.eaton.com
IB02601006E MM-20
Summary of Contents for IQ 250
