Eaton IQ 250, User & Installation Manual

Page: 68 / 142

8-4
IB02601006E
www.eaton.com
Chapter 8:
Programming the IQ 250/260 IQ 250/260 Meter

Three items in the
Title Bar
-
File
,
Tools
, and
View
- open menus that allow you to perform functions. These
menus and functions are described below.
When you click
User Manual
from the
Title Bar
a pdf file of this manual opens, with instructions for whichever
Device Profile Setting
is active at the current time. For example, if you are on the
Display Configuration
screen
and you click
User Manual
, the instructions for setting display configuration are shown.
 Click File from the Title Bar to see the menu shown on the right.
The File menu allows you to perform functions that can also be performed
using the screen Buttons , described on the previous page: Save Profile ,
Load Profile , Report , and Exit Profile Editor .
 Click Tools from the Title Bar to see the menu shown on the right.
The Tools menu allows you to:
o
Update Device
: Functions the same as the
Update Device
button.
See previous page for instructions and Note.
o
Verify Profile
: Click to perform a verification of the
current Device Profile settings. You will see a
window like the one shown below, on the right.
NOTE
: If there are any errors, the number of errors
and type are listed in the window. Click
View>Output
Logs>Errors
to see more information about any
errors (refer to the
View
menu section on the next
page for additional information).
o
Load from Device
: Click to load the Settings fields
with values from the currently connected meter.
IMPORTANT! If you have made changes to the settings and have not saved them to a file or
updated the device, the changes are lost.