Eaton IQ 250, User & Installation Manual

Page: 98 / 142

8-34
IB02601006E
www.eaton.com
Chapter 8:
Programming the IQ 250/260 IQ 250/260 Meter
Using the Options Screen
1. Click View>Options . You will see the screen shown on the
right.
Use this screen to access the following features:
• Paths for IQ 250/260 Configuration Software files
• Data Scan Mode
• Tech Mode Settings
Use the tabs at the top of the screen to access the features.
2. The first Options screen is the Paths screen, shown on the
right. Use this screen to view or change the paths the
IQ 250/260 configuration software uses for data.
3. Click the Data Scan Mode tab to see the second screen on
the right. Use this screen to select Normal Scan rate or to
enter a custom Scan rate .
4. Click the Tech Mode tab to see the third screen on the right.
Use this screen to access Tech Mode, by entering a valid
password.
5. Click:
• Apply to apply your selection(s) and keep the Options
screen open.
• Okay to apply your selection and close the Options screen.
• Cancel to close the Options screen without saving any
selections that have not been applied (using the Apply
button).
Using the Help Menu
The Help menu, accessed by clicking Help in the Title Bar ,
allows you to:
• View this manual online: click Help>User Manual .
• View information about the IQ 250/260 Configuration Software, including version number: click Help>About IQ
250/260 Configuration Software.