Eaton IQ 250, User & Installation Manual

Page: 46 / 142

6-4
IB02601006E
www.eaton.com
Chapter 6:
Using the IQ 250/260 IQ 250/260 Meter
Entering a Password
If Password Protection has been enabled in the software for Reset and/or Configuration (see Chapter 8 for
information), a screen appears requesting a Password when you try to reset the meter and/or configure settings
through the front panel.
• PASS appears in the A window and 4 dashes appear in the B window. The leftmost dash is flashing.
1. Press the Down button to scroll numbers from 0 to 9 for the flashing dash. When the correct number
appears for that dash, use the the Right button to move to the next dash.
Example: The left screen, below, shows four dashes. The right screen shows the display after the first
two digits of the password have been entered.
2. When all 4 digits of the password have been selected, press the Enter button.
• If you are in Reset Mode and the correct Password has been entered, “ rSt dMd donE ” or “ rSt EnEr
donE ”appears and the screen resumes auto-scrolling parameters.
• If you are in Configuration Mode and the correct Password has been entered, the display returns to the
screen that required a password.
• If an incorrect Password has been entered, “ PASS ---- FAIL ” appears, and:
• The previous screen is redisplayed, if you are in Reset Mode .
• The previous Operating Mode screen is redisplayed, if you are in
Configuration Mode .