Autopilot Operation
SkyView Classic Pilot’s User Guide –
Revision Z
8-28
awareness of approaches and never should be used as the primary means of
navigating while flying IFR.
1.
Once arriving at the missed approach point, press the GA button (in AUTOPILOT >
PITCH), the discrete GA button or the NOSE UP button on the Autopilot Control Panel.
The autopilot will annunciate “go around” and display “ADD POWER” in the PFD.
2.
Press the NOSE UP or NOSE DN to set the desired climb out rate.
3.
Select a new track direction or press HDG and select a new heading direction.
SkyView Autopilot Control Panel Operation
The SkyView Autopilot Control Panel provides dedicated controls for all Autopilot modes. This
allows the pilot to navigate other menus on the SkyView display while retaining direct access to
the autopilot. Autopilot status appears on the SkyView top bar as normal to show active and
armed modes as well as current bug values. The buttons on the control panel perform exactly
the same functions as the menus under MAIN MENU > AUTOPILOT (which remain available and
usable). As the Autopilot Control Panel provides controls for all Autopilot modes, including
VNAV, IAS hold, Flight director, etc., it can only be used when the system is configured to use
the Expert Autopilot control scheme. When SkyView is set for Simplified Controls, the AP
module is inactive. See the Expert Autopilot Operation section of this manual for more details.
