SV-MAP-270 Navigation Mapping Software
SkyView Classic Pilot’s User Guide –
Revision Z
7-63
If you insert a waypoint via the ADD->FPL button, the default insert location will be the end of
the Flight Plan, but a different location can be selected in this case as well.
Figure 144
-
Flight Plan Waypoint Insertion
Flight Plan Alert Messages
Alert Messages related to the active Flight Plan are displayed on the bottom of the Map Page
when appropriate:
•
FPL TURN: XXs: Displayed when there is less than 30 seconds before a transition from
one leg to the next in a flight plan, where XX is the number of seconds.
•
LAST LEG EXTD: Displayed when the destination waypoint of the last leg has been
passed. SkyView automatically extends the active leg indefinitely.
•
TRN TOO STEEP: Displayed when the required bank to complete the upcoming turn as
depicted on the map is excessive.
Figure 145
-
Flight Plan Alert Messages
Activating a Flight Plan
Press the NAVIGATE button to activate your
SKYVIEW
Flight Plan routing. Guidance will be
provided directly to the first waypoint in the Flight Plan and along each leg in the Flight Plan
thereafter. Guidance is visible for each leg on the HSI if
SKYVIEW
is selected as the HSI SRC.
To go directly to a waypoint other than the first, go into the Flight Plan menu, scroll to the
waypoint you want to navigate to, press
. Guidance will be provided directly to the
selected waypoint and to the remaining legs in the Flight Plan after that. Similarly, use the
ACTIVATE LEG option in the FPL MENU to skip to the leg that ends with the highlighted
