Carrying Your Device
Your M3 device was shipped with an adjustable carrying strap/handle. The strap attachment points are at
the bottom of the left and right sides of your device (see below). To attach the strap to the device, please
follow these steps:
1.
There is a plastic clip a few inches from each end of the carrying strap/handle (the clip on one
end is covered by a padded hand grip that closes with velcro). Detach one of these ends from
the strap. The strap is now in two pieces, each with a loop of cording at one end.
2.
Thread the cording on one piece of the strap under the bar on one of the two strap attachment
points on your device.
3.
Tuck the other end of the same piece of strap through the loop of cording and pull it completely
through. One end of the strap is now attached to the device.
4.
Repeat steps 2 and 3 to connect the second piece of strap to the other strap attachment point.
5.
Once both pieces of strap are attached to the device, clip both pieces together again.
If you want to use a short handle strap instead of a long shoulder strap, follow these steps:
1.
Open the padded hand grip that covers the clip.
DynaVox M3: Quick Start Guide
Part # 400810-A
15
Strap Attachment Point
Strap Attachment Point
Summary of Contents for M3
Page 1: ......
Page 4: ...DynaVox Technologies iv ...
