DynaVox M3 Quick Start Manual Download | Manualshive

Page: 18 / 84

background image

DynaVox Technologies

14

Extending Battery Life

You can extend the daily run time of the battery pack by making some simple adjustments to your device.
Setting the device to maintain a lower screen brightness will use less power. You can also conserve battery
power by using the backlight timeout feature, which puts your device into a low-power state by dimming the
screen’s backlight automatically if it is inactive for a specified period of time. Step-by-step instructions for
performing these simple adjustments are provided in

Section 3: Software Overview

.

Another way to conserve power is to use the DC adapter/charger that was shipped with your device. If you
are near an electrical outlet, plug the device in while you are using it. Simply follow the steps outlined in the

Charging the Battery

section.

Whenever the DC power adapter/charger is plugged in and connected to the device, the battery is being
charged. The amber charging indicator will light up to indicate that charging is occurring. When the battery is
completely charged, the charging indicator will go out. You cannot overcharge the battery, so do not be
concerned about leaving the device plugged in overnight.

Replacing the Battery

If your battery will not maintain a charge, even after being charged correctly, you may need to replace the
battery.

z

If your M3 device is still under warranty, call DynaVox Technical Support at 1-800-344-1778 to

exchange the battery.

z

If your M3 device is no longer under warranty, call DynaVox Customer and Sales Support at

1-800-344-1778 for information on purchasing a new battery.

«
...
16
17
18
19
20
...
»

Summary of Contents for M3





















































































Reviews:

No comments

Related manuals for M3

Brand: Team Losi Pages: 20

Brand: Kadee Pages: 2

Brand: LGB Pages: 11

STAR WARS 75102

Brand: LEGO Pages: 124

Brand: P&M Aviation Pages: 95

Brand: Gyros Pages: 7

Starbeans Coffee Shop

Brand: Great Little Trading Pages: 6

DONAUESCHINGEN SIGNAL TOWER

Brand: Faller Pages: 8

NYC Dreyfuss 4-6-4

Brand: Rail King Pages: 27

Chariot Wagon 8750

Brand: Step2 Pages: 12

Hyper Hawk – HCAA0204

Brand: Flyzone Pages: 2

Brand: Opitec Pages: 7

SkyGlider 2000 EPP

Brand: RCS Pages: 6

Brand: Bestway Pages: 6

Brand: VTech Pages: 11

The House of Fun M780

Brand: PalPlay Pages: 8

Mini Ultra Stick PNP

Brand: E-FLITE Pages: 28

Carry & Go Track Table 21802

Brand: Simplay3 Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands