DynaVox M3 Quick Start Manual Download

Page: 15 / 84

DynaVox M3: Quick Start Guide
Part # 400810-A

Switch Jacks

- Each of the two round switch jacks can be used to plug in a single switch for

scanning access.

Charger Port

- This port can be used to plug in the DC adapter/charger that was shipped with your

M3 device.

Caution:

Never connect any other power adapter to your M3 as it could cause serious damage

to your device.

Strap Attachment Point

- Use this small bar to attach one end of the carrying strap/handle that was

shipped with your M3 device. The other strap attachment point can be found on the opposite side of
the device.

Note:

For step-by-step instructions on attaching the provided carrying strap/handle, refer to the

Carrying the Device

section.

Reference:

More information on all hardware features is available in the DynaVox M3

Searchable Help on the CD that shipped with your M3 device. Refer to

Chapter 2: Hardware

Overview

of the Searchable Help for more information.

Summary of Contents for M3





















































































Search results

Summary of Contents for M3

Reviews:

Related manuals for M3

Brands by name

Popular brands

DynaVox M3, Quick Start Manual

Search results

Summary of Contents for M3

Reviews:

Related manuals for M3

Brands by name

Popular brands