Ducati MULTISTRADA V25 Owner'S Manual Download Page 89

Page: 89 / 400

Closing

Close the side pannier as follows.

Lift and close the external cover by engaging the

edge in the relevant channel on pannier fixed part:

bag will close only in these conditions.

Insert fastening plate (A) into the pannier external

cover and push down.

Turn key counter clockwise.

It is possible to remove key from lock only in these

conditions.

Attention

The side bags are only for light luggage: each

bag can hold a maximum weight of 10 kg (22 lb).

Excessive load might compromise control of the

motorcycle.

Attention

Arrange luggage evenly and keep the heaviest

items to the inside of the bag, so as to avoid

unexpected unbalance of the vehicle.

Fig 72

Downloaded from

ManualsNet.com

search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands

Ducati MULTISTRADA V25, Owner'S Manual

Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands