manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 44

Important

If you install the side panniers (available on

request from Ducati Parts service), sort out luggage

and accessories according to their weight and

arrange them in the side panniers to evenly

distribute the weight. Close the side panniers with

the relevant key locks.

Dangerous products - warnings

Used engine oil

Attention

Prolonged or repeated contact with used

engine oil may cause skin cancer. If working with

engine oil on a daily basis, we recommend washing

your hands thoroughly with soap immediately

afterwards. Keep away from children.

Brake dust

Never clean the brake assembly using compressed

air or a dry brush.

Brake fluid

Attention

Spilling brake fluid onto plastic, rubber or

painted parts of the motorcycle may cause damages.

Protect these parts with a clean shop cloth before

proceeding to service the system. Keep away from

children.

Attention

The fluid used in the brake system is corrosive.

In the event of accidental contact with eyes or skin,

wash the affected area with abundant running water.

Coolant

Engine coolant contains ethylene glycol, which may

ignite under particular conditions, producing

invisible flames. Although the flames from burning

ethylene glycol are not visible, they are still capable

of causing severe burns.

Attention

Take care not to spill engine coolant on the

exhaust system or engine parts.
These parts may be hot and ignite the coolant,

which will subsequently burn with invisible flames.

Coolant (ethylene glycol) is irritant and poisonous

when ingested. Keep away from children. Never

43

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands