manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 344

Disconnect connector (4) from bulb holder (5).

Rotate the bulb holder of the bulb to be replaced

counter clockwise and remove it. Replace the light

bulb with a new identical one.

Note

Be careful to hold the new bulb at the base

only. Never touch the transparent body with your

fingers or it will blacken resulting in reduced bulb

brilliancy.
Upon reassembly, rotate bulb holder (5) clockwise to

block it on the headlamp cover.

Reconnect the connector (4).

Note

To replace the LED parking light, contact a

Ducati authorised service centre.

5

4

Fig 306

343

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands