manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 79

Push forward (towards the front wheel) until fully

home; only in this position will it be possible to lower

handle (A) and lock pannier in place, this operation

ensures pannier locking to its mounting points.

Turn the key counter clockwise to lock handle and

remove it.
Make sure the bag is fixed correctly by pulling the

bag gently to the side and also checking the

swinging movement.

Repeat the same operation for assembling the other

side bag.

Install both bags, check the swinging movement of

both, moving them to the right and left, on the rear

side of the bags.

If there are any problems with the movement,

contact a Ducati Dealer or Authorised Service

Centre.

Attention

Pay attention to the safe positioning of your

hands when checking the swinging movement.

Fig 60

A

Fig 61

78

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands