manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 43

Carrying the maximum load allowed

Your motorcycle is designed for long-distance riding,

carrying the maximum load allowed in full safety.

Even weight distribution is critical to preserving

these safety features and avoiding trouble when

performing sudden manoeuvres or riding on bumpy

roads.

Attention

The maximum speed permitted with the side

panniers, the top case and the tank bag fitted must

not exceed 180 km/h (112 mph) and at any rate it

must comply with the applicable statutory speed

limits.

Attention

Do not exceed the total permitted weight for

the motorcycle and pay attention to information

provided below regarding load capacity.

Information about carrying capacity

Important

Arrange your luggage or heavy accessories in

the lowest possible position and close to motorcycle

centre.

Important

Never fix bulky or heavy objects to the

handlebar or to the front mudguard as this would

affect stability and cause danger.

Important

Be sure to secure the luggage to the supports

provided on the motorcycle as firmly as possible.

Improperly secured luggage may affect stability.

Important

Do not insert any objects you may need to carry

into the gaps of the frame as these may foul moving

parts.

Attention

Make sure the tyres are inflated to the proper

pressure and that they are in good condition.
Refer to the paragraphs "Tubeless Tyres" in the

"Main use and maintenance operations" section and

"Tyres" in the "Technical specifications" section.

42

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands