Ducati MULTISTRADA V25 Owner'S Manual Download Page 59

Page: 59 / 400

Fuel tank plug with electronic-controlled

opening (accessory)

The following description is only valid if the fuel tank

plug with electronic-controlled opening has been

installed on the motorbike.

Opening

To open the plug (4) it is necessary to lift the

appropriate lever (3) within 50 seconds of turning the

motorbike off (key off). During the 50 seconds, the

plug can be opened a maximum of 5 times.

To open the plug once more, turn the ignition key on

and off again (key-on >> key-off).

Attention

The opening lever (3) must be operated gently.

If the lever is operated too quickly, the plug cannot

be opened, although the attempt will be counted as

one of the 5 available.

Fig 32

Downloaded from

ManualsNet.com

search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands

Ducati MULTISTRADA V25, Owner'S Manual

Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands