manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 152

Refuelling

Never overfill the tank when refuelling. Fuel should

never be touching the rim of filler recess.
Warning

The fuel pressure inside the tank may, in extreme

cases, cause fuel to “spray” when opening the fuel

cap.

Always open the fuel cap slowly and carefully during

the refill.

If you hear an audible hiss from the cap while

opening it, wait until the stop of the hissing before

opening it completely.

The sound is residual pressure escaping from the

fuel tank, therefore the stop of the hiss indicates

that there is no more residual pressure.

The situation described above is more likely in hot

weather conditions.

Attention

Use fuel with low lead content and an original

octane number of at least 95.

Attention

The motorcycle is only compatible with fuel

having a maximum content of ethanol of 10% (E10).

Using fuel with ethanol content over 10% is

forbidden. Using it could result in severe damage of

the engine and motorcycle components. Using fuel

with ethanol content over 10% will make the

warranty null and void.

MAX

Fig 136

151

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands