Ducati MULTISTRADA V25 Owner'S Manual Download Page 74

Page: 74 / 400

Centre stand

Always use the centre stand (1) to safely park the

motorcycle. Its structure ensures proper support of

the motorcycle even under full load.

Attention

Before lowering the centre stand, make sure

that the bearing surface is hard and flat.
Push with your right foot onto central stand bearing

surface (2), until it touches the ground; meanwhile

pull the motorcycle up and back.

To bring central stand at rest, just push motorcycle

forward, holding it at the handlebar, until the rear

wheel touches the ground. Stand will automatically

go back in place.

Attention

Before moving off, always make sure that the

central stand is at its rest position.

Fig 54

Fig 55

Downloaded from

ManualsNet.com

search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands

Ducati MULTISTRADA V25, Owner'S Manual

Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands