manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 201

by filtering their effects on vehicle body (and,

consequently, on rider) and allowing the optimal

contact between wheels and asphalt. The DSS

system purpose is to improve the comfort offered by

a standard passive suspension keeping at the same

time the same performance.
The DSS system is fully integrated with bike Riding

Modes. By selecting a certain Riding Mode, the rider

can establish the default suspension behaviour,

suspension response and hence the motorcycle

response. In addition, based on bike dynamics, the

DSS will intervene to correct its behaviour regardless

of the Riding Mode that will nevertheless define

suspension basic behaviour (namely, more

comfortable for RM URBAN and more controlled for

RM SPORT). To better understand this aspect, let's

consider the URBAN and TOURING Riding Modes,

for example. The URBAN riding mode was set for city

use: suspension basic behaviour is thus focused on

maximum damping of asphalt bumps and, to this

end, suspension will generally be more comfortable.

The TOURING Riding Mode, on the contrary, was

devised for a tourist style, more demanding for the

bike and requiring a stricter and more controlled

basic behaviour of the suspension. In both cases, the

DSS system intervenes whenever bike behaviour -

its setup, vertical and longitudinal movements in

particular - result in poor comfort or limited vehicle

performance; both when riding at constant speed

and when braking or accelerating.

To save battery charge, two conditions are

envisaged:

1) with engine running, if engine is turned off but

instrument panel is still on, after 30 seconds

suspensions are no longer powered;

2) with engine off, if instrument panel is turned on

but engine is still off, after 30 seconds

suspensions are no longer powered.

Note

These suspensions, when not powered, are

particularly hard due to the high hydraulic damping,

as it happens when bike is off. The transition from

powered suspensions to suspensions off can be

perfectly perceived.

Note

With key-off (bike off), suspension is hard as

valves, being not powered, keep hydraulic damping

at the minimum level.

200

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands