Ducati MULTISTRADA V25 Owner'S Manual Download Page 211

Page: 211 / 400

Trip time (TRIP TIME 1)

The instrument panel calculates and shows trip time.

Value is displayed as hhh:mm followed by “TRIP

TIME 1” indication.

The calculation is made considering the time elapsed

since the last reset of Trip time (TRIP 1, page 209),

average fuel consumption (CONS.AVG 1, page 207)

and average speed (SPEED AVG 1, page 211). When

TRIP 1 is reset, this value is reset as well.
The active time counting phase occurs when the

engine is running, even when the vehicle is stopped.

The time count is automatically stopped when the

vehicle is not moving and the engine is off and

restarts when the counting active phase starts

again.

When the reading exceeds 511:00 (511 hours and 00

minutes), the meter is reset and automatically starts

counting from 0 again.
If button (4) is pressed when trip time is displayed,

the instrument panel will activate the warning

"RESET ?" in place of the time. When this warning is

active, Menu scrolling is not possible.

If you press button (1) or (2), the instrument panel will

display TRIP TIME 1 again, without resetting the

value.

While if you press button (4), value for TRIP TIME 1

will be reset and the instrument panel will display

TRIP TIME 1 at “0:00”.

Note

If you change the unit of measurement for an

item connected to Speed (and distance) or

Consumption or after a Battery-Off, the trip time

value will be automatically reset.

1:54

56.5

Km/h

TRIP 1

TRIP

TIME 1

SPEED

AVG 1

Fig 165

210

Downloaded from

ManualsNet.com

search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands

Ducati MULTISTRADA V25, Owner'S Manual

Search results

Summary of Contents for MULTISTRADA V25

Reviews:

Brands by name

Popular brands