manualshive.com logo in svg

Ducati MULTISTRADA V25, Owner'S Manual

Share
Download
Ducati MULTISTRADA V25 Owner'S Manual Download Page 361

Technical data

Weights

Overall weight (in running order with 90% of fuel -

44/2014/EU Annex XI):

225 Kg (496.04 lb);

Overall weight with spoked wheel rims (in running

order with 90% of fuel - 44/2014/EU Annex XI):

230 Kg (507.06 lb);

Overall weight (in running order without fluids and

battery):

202 Kg (445.33 lb);

Overall weight with spoked wheel rims (in running

order without fluids and battery):

207 Kg (456.35 lb);

Maximum allowed weight (in running order, carrying

full load):

465 kg (1025 lb).

Attention

Failure to observe weight limits could result in

poor handling and impair the performance of your

motorcycle, and you may lose control of the

motorcycle.

Attention

The maximum speed permitted with the side

panniers, the top case and the tank bag fitted must

not exceed 180 km/h (112 mph) and at any rate it

must comply with the applicable statutory speed

limits.

1

3

2

Fig 311

360

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for MULTISTRADA V25

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands